[TAG2]

If you’re looking to upgrade your JEEP JK’s front turn signal headlights, one option is to replace them with Y splitter adapters. This will allow you to install LED turn signal bulbs and gain brighter, more efficient lighting. Here’s a step-by-step guide on how to replace your JEEP JK front turn signal headlights with the Y splitter adapter.

Materials Needed:

• Y splitter adapters
• LED turn signal bulbs
• Flathead screwdriver
• Needle nose pliers

Step 1: Remove the Stock Bulbs Locate the turn signal bulbs on your JEEP JK’s front headlights. Using a flathead screwdriver, gently pry off the plastic cover to reveal the bulb. Using needle nose pliers, turn the bulb counterclockwise to remove it from the socket. Repeat this process for both the driver and passenger side headlights.

Step 2: Install the Y Splitter Adapters Take your Y splitter adapters and plug them into the sockets where you removed the stock bulbs. Make sure they are securely in place and there are no loose connections.

Step 3: Install the LED Turn Signal Bulbs Take your LED turn signal bulbs and insert them into the Y splitter adapters. Twist the bulbs clockwise to secure them in place. Repeat this process for both the driver and passenger side headlights.

Step 4: Test the Lights Turn on your JEEP JK’s headlights and test the turn signals to make sure they are functioning properly. If everything is working correctly, replace the plastic cover on each headlight.

And there you have it! By following these simple steps, you can replace your JEEP JK’s front turn signal headlights with Y splitter adapters and LED turn signal bulbs. This upgrade will give your JEEP brighter and more efficient lighting, as well as a modern look.

Check the Y splitter adapter and pigtail price here.

The post Upgrade JEEP Wrangler JK Front Turn Signal headlights appeared first on My Offroad LED.