Big Green Egg Cold Smoked Salmon

By Todd Martin January 23, 2026 17 mins read 11 Views

The Art of the Chill: Mastering Cold Smoked Salmon

Hello again and welcome back! This year has started off with a series of blog posts featuring things I have wanted to learn but for one reason or another procrastinated. This post focuses on curing and cold smoking, two areas covered in a great book named Charcuterie: The Craft of Salting, Smoking, and Curing by Michael Ruhlman and Brian Polcyn. This book is a staple for anyone looking to go beyond standard grilling and into the deeper science of meat preservation.

For this cook, I followed the “pro-level” path: I cured, then cold smoked a beautiful piece of farm-raised salmon. Unlike hot smoking, where the goal is to flake the fish with heat, cold smoking is a delicate dance of salt and smoke that preserves the silky, buttery texture of the salmon while infusing it with an incredible depth of flavor.

It’s a process that requires patience, but the result is a delicacy that rivals the best “nova” lox you can find in New York or Scandinavia. So, let’s get into the details. Now sit back, grab a nice glass of Sauvignon Blanc, the crisp acidity is the perfect pairing for the richness of the fish, and enjoy this post for Big Green Egg Cold Smoked Salmon.

Understanding the Process: Cure First, Smoke Second

Before we touch the Big Green Egg, we have to talk about the most important step: The Cure. You cannot cold smoke raw salmon safely without first removing excess moisture and “setting” the protein with salt.

For this farm-raised salmon, I used a classic dry cure. This isn’t just for flavor; the salt acts as a preservative and creates a “pellicle”, a tacky skin on the surface of the fish, that allows the smoke to stick properly later on.

The Basic Cure Mix

Optional Aromatics: Many recipes from Charcuterie suggest adding things like lemon zest, fresh dill, or crushed peppercorns to infuse the meat during the 24-hour soak.

Kosher Salt: The primary engine of the cure.

Sugar: To balance the salt and keep the fish tender.

The Simplicity of the Cure: Salt and Sugar

Although there are a lot of moving parts to this recipe, the cure used for the salmon was surprisingly simple, featuring just two primary ingredients: Coarse Salt and Brown Sugar. In the world of Charcuterie, it is easy to get lost in complex spice blends, but for high-quality salmon, you want the natural flavor of the fish to shine through. The salt and sugar perform a specific, essential chemistry:

Coarse Salt: This is the workhorse. It draws moisture out of the salmon cells through osmosis, which firm up the flesh and inhibits the growth of bacteria. Using a coarse grain is important because it dissolves more slowly and evenly than fine table salt.
Brown Sugar: While the salt draws moisture out, the sugar helps to mellow the harshness of the salt and keeps the salmon from becoming too “ham-my” or tough. The molasses in the brown sugar also adds a subtle hint of caramel that pairs beautifully with the smoke later on.

The 2:1 Ratio

For this beautiful piece of farm-raised salmon, I used a standard ratio of 2 parts salt to 1 part sugar. This ensures enough salinity to safely cure the fish while maintaining that silky texture we expect from cold-smoked salmon.

The Application

I applied a generous layer of this mixture to both the flesh and the skin side of the salmon. You want to make sure the fish is completely “buried” in the cure. Once coated, I wrapped it tightly and placed it in the refrigerator.

Pitmaster Note: During this stage, you’ll notice liquid pooling in your container. That’s a good sign! It means the salt is doing its job and pulling the water out of the fish, concentrating the flavor and preparing it for the smoke.

The Transformation: From Fresh to Cured

As the salt and sugar go to work, you’ll witness a fascinating bit of food science. Because the cure pulls so much moisture out of the salmon, it essentially creates its own “brine.” I quickly realized I needed to move the salmon to a deeper dish to accommodate all that extracted liquid and ensure the fish stayed in contact with the curing agents.

The 36-Hour Mark

Here is the salmon after 36 hours in the cure. The change is dramatic:

Weight: If you were to weigh the salmon now, it would be significantly lighter than when it started. This loss of water weight is what makes cold smoking possible; with less water, the fish is less hospitable to bacteria and more receptive to smoke.

Texture: What was once a soft, pliable piece of raw fish has now become firm and dense to the touch. The muscle fibers have tightened up, which is exactly what you want for a clean slice later.

Color: The flesh has taken on a deeper, more vibrant translucent orange. It looks “jewel-like” and polished.

The Desalination: Finding the Perfect Balance

Once the salmon has spent that critical 24 to 48 hours in the cure, it has been successfully preserved, but it is also packed with an intense amount of salt. If you moved straight from the cure to the smoker, the flavor would be overwhelming. To get that delicate, high-end deli taste, you have to perform a two-step “reset.”

1. The Initial Rinse

First, I took the salmon out of its brine and held it under a steady stream of cold, running water. You want to be thorough here, use your fingers to gently rub away every visible grain of salt and sugar from both the flesh and the skin.

2. The 30-Minute Soak

Even after a good rinse, the exterior of the fish is still highly concentrated with salt. To “pull” some of that excess salinity back out, I placed the salmon in a large bowl of fresh, cold water for 30 minutes.

How it works: This is essentially reverse-osmosis in action. The fresh water helps draw out the salt from the very surface of the fish, ensuring the final product is savory and seasoned, rather than “salty.”
Don’t skip this: This 30-minute soak is the secret difference between “homemade” jerky-style salmon and a professional-grade lox.

3. Drying, the Wire Rack, and the Pellicle

After the soak, the final preparation step is all about airflow. I pulled the salmon out of the water, patted it dry with paper towels, and placed it onto a wire cooling rack set over a baking sheet.

I then placed the entire setup into the refrigerator, uncovered, to sit overnight.

The Smoke Magnet: Think of the pellicle as a “smoke magnet.” Smoke doesn’t stick well to wet meat; it bounces off. By drying it overnight on the rack, you create a surface that the smoke will perfectly adhere to, resulting in that deep, translucent color and rich flavor we’re looking for.

Why the Wire Rack? Using a rack is essential because it allows air to circulate around the entire piece of fish, top, bottom, and sides. If you lay it flat on a plate, the bottom stays damp, which prevents an even cure.

Creating the “Glue”: This overnight rest in the dry environment of the fridge develops the pellicle. This is a thin, tacky, slightly shiny skin that forms on the surface of the meat.

Setting the Stage for Smoke

With the salmon cured, rinsed, soaked, and dried, it is finally ready for the Big Green Egg. But remember: this is a cold smoke, so we aren’t lighting a traditional fire.

The “No-Heat” Smoke Setup: Harnessing the Smoker Tray

After the salmon has rested overnight in the fridge and that perfect, tacky pellicle has formed, it’s finally time to head to the Big Green Egg.

For a true cold smoke, the internal temperature of your grill must stay below 80°F. If it climbs too high, the fish will begin to “cook,” and you’ll lose that buttery, silky texture. To achieve this, we aren’t lighting the lump charcoal in the Egg at all. Instead, we use an external smoke generator that smolders independently of the grill’s main fuel source.

The Solution: Kaduf Pellet Smoker Tray

Since the Amazen maze is currently out of stock, the Kaduf Pellet Smoker Tray is the perfect alternative. It uses the same “maze” principle to provide long-lasting smoke without significant heat.

Long-Lasting Performance: This tray is designed to provide up to 12 hours of billowing smoke, which is more than enough for several batches of salmon.
Versatile Fueling: It works exceptionally well with Apple Wood pellets for a mild, sweet flavor, but you can also use wood chips if you prefer a more intense smoke profile.
Compact Design: The 5″x8″ stainless steel design fits easily on the charcoal grate of a Large Big Green Egg, leaving the main cooking surface entirely free for your fish.

Other Ways to Get the Smoke Rolling

If you’re looking for different styles of smoke generators or a DIY approach, here are some great alternatives:

Pellet Smoker Tubes: Options like the Lizzq 12″ Pellet Smoker Tube are incredibly popular. While they take up less space, they typically burn for about 5 hours. They are perfect for shorter cold-smoking sessions like cheese or nuts.
The “Two-Grill” Offset (DIY): If you have a second, smaller grill, you can light a tiny fire there and use a flexible dryer vent hose to pipe the smoke into the bottom vent of your Big Green Egg. This allows the smoke to cool completely before it ever touches the salmon.
The “Ice Bath” Heat Sink: On warmer days, place a large pan of ice on top of your convEGGerator (plate setter) directly beneath the salmon. This acts as a thermal barrier, ensuring the ambient temperature around the fish stays chilled while the smoke circulates.

The Smoke Duration

Once your Kaduf tray is lit and placed in the bottom of the Egg, position your salmon on the main cooking grid. I recommend leaving the salmon on its wire rack to ensure the smoke can circulate around the bottom of the fillet as well.

Fill the maze with the pellets.

Prepping the Big Green Egg for a Heat-Free Environment

Before we start the smoke, we have to address the “thermal mass” of the Big Green Egg. These ceramic cookers are world-class at holding heat, which is usually a benefit, but for cold smoking, it’s our biggest hurdle.

1. The Empty Firebox

The first step is to clean out all of the lump charcoal from your Big Green Egg. You want the firebox to be completely empty.

The Reason: Even unlit charcoal can hold onto ambient heat or restrict the airflow we need to keep the temperature low. By starting with a “clean slate,” you create a large, empty chamber that allows the cool smoke to circulate freely without any obstructions.

2. Lighting the Pellet Smoker

Once the Egg is empty, place your Kaduf Pellet Smoker Tray (or your smoke generator of choice) directly on top of the bottom fire grate.

The Torch: Use a butane torch to light the pellets at the starting corner of the maze. Don’t be shy with the flame; you want to see a localized fire starting to roar.
The 10-Minute Rule: Once the pellets catch fire, let the flame burn for a full 10 minutes. This feels like a long time, but it’s the most important part of the process. You are establishing a deep, self-sustaining ember bed.
The Blow Out: After 10 minutes, gently blow out the flame. You should be left with a glowing red cherry and a thick, steady stream of “thin blue smoke.” If you blow it out too early, the pellets might extinguish once you close the dome, so patience here is key.

3. The Setup Flow

With the smoker tray smoldering, I then put the convEGGerator (plate setter) back in (legs up). On top of the legs, I place the stainless steel cooking grid. Finally, the salmon—still resting on its wire rack from the fridge—goes onto the grid.

Pro Tip: Make sure your bottom vent and top daisy wheel are wide open for the first few minutes to ensure the pellets have enough oxygen to stay lit. Once you see smoke consistently exiting the top, you can adjust the vents to a “half-open” position to trap the smoke without building heat.

The Smoke Session

Now that the “smoke engine” is running and the salmon is positioned high away from the smoldering pellets, the real transformation begins.

Airflow and Environmental Control

With the pellet tray smoldering, it’s time to finalize the configuration. As mentioned, we want the smoke to move through the chamber rather than stagnating, which is why vent management is different for this cook than for a typical low-and-slow BBQ.

1. Wide Open Airflow

Keep both the top and bottom vents all the way open.

The Goal: You want the smoke to “billow” from the Big Green Egg. Since we aren’t using lump charcoal, we aren’t worried about the vents feeding a massive fire. Instead, the open vents provide the oxygen necessary to keep the pellets smoldering in the tray and ensure a constant stream of fresh smoke passes over the fish.

2. Final Stack Assembly

As we established in the setup, place your convEGGerator (plate setter) in the legs-up position, followed by the stainless steel grill grate on top. This creates a multi-layered barrier between the smoldering pellets and the fish, ensuring that even the tiny amount of heat produced by the tray is dissipated before it reaches the salmon.

3. The Temperature “Safe Zone”

This is the most critical part of the process: Cold smoking must stay under 90°F (and ideally below 80°F). If the internal temp of the Egg crosses that threshold, the protein structure of the salmon changes, and you’ll end up with a cooked, flaky texture instead of the silky, translucent “Lox-style” finish.

The Ice Hack: If you are attempting this in weather above 70°F, the ambient temperature combined with the smoldering pellets will likely push the Egg into the “danger zone.” In that case, you must add a tray of ice on top of the convEGGerator. This acts as a heat sink to keep the internal environment chilled.
The February Advantage: Fortunately for this cook, Mother Nature was on my side. I did this in February with an outside temperature of 32°F. The Big Green Egg acted like a natural refrigerator, and the small ember from the pellet tray wasn’t enough to fight off the winter chill, keeping my internal temps perfectly low without the need for ice.

The Waiting Game

With the vents open and the winter air keeping the Egg chilled, the salmon is now in its happy place. Now we wait for the smoke to work its magic into the flesh.

The Long Bathe: 6 to 12 Hours of Smoke

Once you’ve confirmed the pellet tray is reliably producing that “thin blue smoke” for about 10 minutes, it’s time for the main event. Take your salmon, which should be sitting ready on that wire rack, and place it directly onto the cooking grid.

The Science of the Sit

By keeping the salmon on the rack rather than placing it directly on the Egg’s grate, you ensure that the smoke can circulate under the skin as well as over the flesh. Close the dome and settle in; this is the longest part of the journey.

Depending on your preference for smoke intensity, you want to let the salmon ride for anywhere from 6 to 12 hours.

The 6-Hour Mark: This results in a “Light Smoke.” The flavor will be delicate, allowing the natural richness of the farm-raised salmon and the sweetness of the brown sugar cure to take center stage. This is ideal if you plan on serving the salmon with bold accompaniments like capers or red onions.
The 12-Hour Mark: This is for the true smoke lovers. A full 12-hour session (which the Kaduf tray can easily handle) produces a deep, traditional cold-smoked profile. The applewood flavor becomes more pronounced, and the exterior of the fish will take on a darker, more burnished hue.

Set It and Forget It

Because we are working in such a low-temperature environment (especially in that 32°F February air), you don’t need to worry about the fish overcooking. Your main job is simply to peek at the top vent every few hours to ensure that “whispy” smoke is still exiting the Egg. If the smoke stops, your pellet maze may have hit a “dead spot” and might need a quick relight.

The Finish Line is Close

As the hours pass, the smoke will permeate the pellicle we worked so hard to create, locking in that signature flavor. But be warned: the hardest part of this recipe isn’t the cure or the setup, it’s the wait that happens after you take it off the grill.

The 8-Hour Sweet Spot

For this particular fillet, the salmon reached its flavor peak right at the 8-hour mark. While the cold smoking window is flexible, 8 hours provides that quintessential “Goldilocks” result: enough smoke to be distinct and sophisticated, but not so much that it masks the buttery, clean taste of the fish.

Endurance of the Pellet Tray

As you can see in the photos, the Kaduf Pellet Smoker Tray was still going strong even after a full workday of smoking. One of the most impressive things about these maze-style smokers is their efficiency. Despite its small footprint, the slow “fuse-style” burn means it barely looks like you’ve made a dent in the pellet supply, yet it has been consistently pumping out that beautiful applewood aroma for hours.

Signs of Success

By the time I decided to pull the salmon, I looked for a few key visual cues:

The “Luster”: The pellicle had transformed from a simple tacky surface to a gorgeous, deep-orange lacquer. It looked almost like a piece of polished maple.
The Firmness: When gently pressed, the salmon felt firm and dense, a stark contrast to the soft, flabby texture of a fresh, uncured fillet.
The Aroma: The smell was no longer just “salty” or “sweet”; it had that intoxicating, woody perfume that only comes from a long, slow cold smoke.

Stopping the Clock

At 8 hours, I carefully lifted the wire rack off the Big Green Egg. It’s tempting to grab a knife and start slicing immediately as the smell alone is enough to make you want to skip the final step. But this is where the Charcuterie book teaches us one last lesson in discipline.

The Cold Rest

The smoke is currently “heavy” on the surface of the meat. To let those flavors migrate inward and mellow out, the salmon needs to be wrapped tightly in plastic wrap and placed back in the fridge for at least 24 hours. This ensures that every bite, from the skin to the surface, tastes exactly the same.

The Final Rest: Locking in the Flavor

Once the salmon has reached its 8-hour peak, it’s time for the final, and perhaps most difficult step: the waiting period. Pull the smoked salmon from the Big Green Egg, still on its wire rack, and bring it inside.

Why We Wrap in Butcher Paper

At this stage, I place the fillet onto a large piece of butcher paper. Unlike plastic wrap, which can sometimes trap excess moisture and make the pellicle soggy, butcher paper allows the fish to “breathe” just enough while still protecting it from the dry air of the refrigerator.

Texture Stabilization: The cold environment of the fridge helps the fats and proteins stabilize further. This makes the salmon much easier to slice into those translucent, paper-thin ribbons that are the hallmark of high-quality lox.

The Mellowing Effect: Right off the smoker, the flavor can be a bit “acrid” or overly intense on the very surface. By wrapping it and letting it sit in the refrigerator overnight, you allow the smoke molecules to migrate from the surface deep into the center of the fillet. This results in a balanced, uniform flavor throughout every bite.

The Next Morning: The Big Reveal

After its overnight rest, the salmon is officially transformed. What started as a standard piece of farm-raised fish is now a home-cured delicacy.

When you’re ready to serve, use a long, thin, sharp carving knife (or a dedicated salmon slicer). Aim for thin slices against the grain, starting at the tail end. Serve it up on a toasted bagel with cream cheese, capers, and red onion, or simply enjoy it on a cracker to let the applewood smoke shine.

Final Thoughts on the Cook

This project was a perfect reminder of why I love the Big Green Egg. It’s not just a grill; it’s a versatile tool that can handle everything from a 700°F sear to a 32°F cold smoke. If you’ve been procrastinating on curing and smoking your own fish, let this be your sign to start. The process is long, but the reward is world-class.